Boiled Linseed Oil

£19.44£45.00 inc. VAT

SKU: N/A Categories: ,
Products over £200 (net) please call us on +44 (0)29 2034 0323
or email us at


Boiled Linseed Oil is traditionally processed by the controlled oxidation of raw linseed oil. Drying time is significantly reduced on application, with and remains suitable for both interior and exterior wood substrates.

Additional information

Weight N/A

Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Boiled Linseed Oil is formulated for application directly, and does not require thinning.


Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply THINLY using a good quality bristle or synthetic brush and lay EVENLY, following the direction of the grain. Remove any surplus material immediately with a cloth, carefully checking all areas for any excess application. Leave to dry 8-10 hours in warm, dry well ventilated conditions, or preferably overnight.


Apply as first coat, THINLY, allowing good ventilation. Leave to dry 8-10 hours in warm, dry well ventilated conditions, or preferably overnight. Clean applicator with White Spirit. Apply 3 coats to new interior timber, and 4 coats to exterior timber. Clean applicators with White Spirit.


To renovate previous application of Boiled Oil, lightly sand area with 150 grit sandpaper, and re-apply.


For regular light maintenance, clean with a damp cloth and wipe dry. Re-application may be necessary where soiling or staining is apparent, following the application details above.


A single application will cover approximately 20-24 square meters per litre,depending on the density of the substrate.


1lt, 5lt

You may also like…