Exterior Wood Protector

Ensure all surfaces are clean, dry, and free from any previous finish.

Remove any fungal growth, dirt or moss on old wood prior to application

Sand the substrate with a medium 120 grade sanding paper, removing all traces of dust.

Apply in dry conditions.
Always test on a small area prior to initial application to check colour shade. Apply with brush or solvent resistant, low pressure garden sprayer, ideally in still conditions if spraying.

Stir contents thoroughly before and during use. Apply consistently using a good quality bristle or synthetic brush and lay evenly, following the direction of the grain. Leave to dry 12 hours or preferably overnight.

Apply as first coat. Leave to dry 12 hours or preferably overnight.

Apply as above. Clean applicators with White Spirit.

A single application will approximately cover 6 square meters per litre, depending on density of substrate.

5lt

Clear, Harvest Brown, Fern Green, Chestnut, Cedar