Premier Wood Varnish

£15.84£68.84 inc. VAT

How Much do I need? +

*Single Coat depending on substrate

Clear
SKU: N/A Category:
Products over £200 (net) please call us on +44 (0)29 2034 0323
or email us at sales@fiddes.co.uk.

Description

Fiddes Premier Wood Varnish is a water based Polyurethane/Acrylic finish, for the surface treatment of wood floors, furniture and internal joinery.

Quick-drying, no yellowing and with excellent durability, Fiddes Premier Wood Varnish is the ideal water based finish for all domestic environments.

Additional information

Weight N/A
Preparation

Ensure all surfaces are clean, dry, and free from any previous finish. Fill any cracks/knots with Fiddes Floor Filler Gel where required. Sand the substrate with a fine 120/150 grade sanding paper or 120/150 grit sanding disk, removing all traces of dust.

Application

Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. Maximum 2 coats recommended, 3 on softwood if required. Apply at room temperature. Fiddes Premier Wood Varnishis formulated for application directly, and does not require thinning.

First Coat

Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply THINLY using Fiddes Floor Oil Brush or a good quality bristle or synthetic brush, and lay EVENLY, following the direction of the grain. Leave to dry 2-3 hours in warm, dry well ventilated conditions.

Second Coat

Apply as first coat, THINLY, allowing good ventilation. Leave to dry 2-3 hours in warm, dry well ventilated conditions. Clean applicator with water

Coats

Two Coats, three on softwood if required.

Cleaning & Maintenance

For regular light cleaning, a damp cloth should be applied and resulting clean area
left to dry. Periodically, an application of Fiddes Floor Surface Cleaner is recommended.

Coverage

8-10 sqm per litre at 120-100g/m2 per coat

Packaging

1lt, 2.5lt, 5lt

Notes

Always test intercoat adhesion on a small area prior to major application.
Do not apply in high temperatures (25c +)
Longer drying periods may occur during application in cold, damp or humid conditions.
Full cure/hardness will be reached in 7 days.
Store in frost free area.

FINISHES

Clear Satin, Clear Matt, Clear Gloss

You may also like…