FIDDES Full Stop H20

Fiddes FULL STOP H20 is a newly formulated water-based, anti-mould
universal white acrylic primer-sealer that permanently blocks stains and
odours in just one coat.

  • Penetrates & seals porous surfaces and locks in odours.
  • Increases surface adhesion and accepts all oil, water–based and
    acrylic     top coats.

£27.84 – £114.24 INC. VAT

SKU: N/A Category:

Weight 1 kg
PREPERATION

Ensure all surfaces are clean, dry, and free from any loose paint, dust debris.
Clean down and de-grease surface to remove engrained contamination such as excessive grease, wax, mould and oil that may affect adhesion, prior to application. Sand surface to remove any flaking paint or loose debris, to a smooth clean finish.
Application

Apply in dry conditions at room temperature, and stir contents thoroughly.
Apply with natural or synthetic bristle brush, roller or spray. Refer to manufacturers spray equipment instructions and clean down with soap and water.

Not recommended for use on ferrous metal/steel, floors or exterior decking and roofs.
Coverage

A single application will approximately cover 10 m2 per litre, depending on density of substrate.
Touch dry in 25 minutes. Re-coat in 45 minutes at room temperature.
Allow 2 hrs dry in low temperatures or over damp stains and resinous knots. Apply 2 coats on new timber.
THINNERS

Water
COATS

Single Coat
RECOMMENDED FOR USE ON

Interior/Exterior Wood, Dry Wall, Plaster, Paint, Varnish, Aluminium, Glass, Ceramic Tiles
Size

1lt, 2.5lt, 5lt

You may also like…