Severe Use Waterborne Sealer

£58.36 inc. VAT

How Much do I need? +

*Single Coat depending on substrate

Products over £200 (net) please call us on +44 (0)29 2034 0323
or email us at


Fiddes Waterborne Sealer provides an easy sand, high build base for subsequent application of Fiddes Severe Use Waterborne lacquers. Formulated for use on MDF, also ideal for use on hard and softwoods.

Additional information

Weight N/A
Key Product Benefits

Ease of application
High build
Single pack
Quick drying
Low odour & non flammable
Complies with E.P.A. regulations


Sand the wooden substrate in stages, working with a medium sandpaper (120 grit), through to a medium / fine grade (180 –220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Spray Lacquers. Take care to remove all traces of sanding dust and test the chosen sheen level on a similar substrate before application.

Always stir the contents well and ensure all Fiddes Spray Lacquers are applied in a dust free environment with sufficient ventilation.


Formulated for spray application through conventional, airless or HVLP systems.

Add 5% water if required. Higher temperatures will reduce drying times.

Always protect from frost and spray in temperatures above 20c.

Always stir contents well and check sheen before use.

Contact Fiddes Technical Department for specific advice on different spraying techniques and finishing options.

Air Pressure

45-60 psi

Fluid Pressure

10-15 psi


8sq. metres per litre approx.

Touch Dry

20 mins Re-coat

Re coat

45-60 mins





You may also like…