Severe Use Waterborne Lacquer

£58.36£216.08 inc. VAT

How Much do I need? +

*Single Coat depending on substrate

Products over £200 (net) please call us on +44 (0)29 2034 0323
or email us at


A high build, severe use rated, water based lacquer, providing excellent clarity on hardwood or softwood substrates. Formulated as a single pack, internally crosslinking system.


Fiddes Waterborne Lacquer is also available in a wide range of colours, either matched to your own specification or to an existing colour chart (RAL / BS4800 / PANTONE / DULUX).

Additional information

Weight N/A
Key Product Benefits

Ease of application
High build
Single pack
Quick drying
Low odour & non flammable
Complies with E.P.A. regulations


Sand the wooden substrate in stages, working with a medium sandpaper (120 grit), through to a medium / fine grade (180 –220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Spray Lacquers. Take care to remove all traces of sanding dust and test the chosen sheen level on a similar substrate before application.

Always stir the contents well and ensure all Fiddes Spray Lacquers are applied in a dust free environment with sufficient ventilation.


Formulated for spray application through conventional, airless or HVLP systems.

Add 5% water if required. Higher temperatures will reduce drying times.

Always protect from frost and spray in temperatures above 20c.

Always stir contents well and check sheen before use.

Contact Fiddes Technical Department for specific advice on different spraying techniques and finishing options.

Air Pressure

45-60 psi

Fluid Pressure

10-15 psi


8sq. metres per litre approx.

Touch Dry

20 mins


45-40 mins




5lt, 25lt


Gloss – 90%, Satin – 45%, Matt – 20%

You may also like…