A/C Compliant Lacquer

£54.08£889.15 inc. VAT

How Much do I need? +

*Single Coat depending on substrate

Products over £200 (net) please call us on +44 (0)29 2034 0323
or email us at sales@fiddes.co.uk.


An Acid catalysed, twin pack, high solids, compliant range of lacquers, formulated to provide very high standards of resistance and surface abrasion on most interior wood surfaces. Exhibiting excellent flow and high build qualities, Fiddes A/C Lacquers should be applied in areas where durability and quality of finish are the main requirements.

Additional information

Weight N/A
Key Product Benefits

Excellent durability
High build
Self levelling
Good flow on application
Severe use rating

A/C Matt

Sheen: 10% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins

A/C Semi Matt

Sheen: 20% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins

A/C Satin

Sheen: 50% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins

A/C Semi Gloss

Sheen: 60% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins

A/C Gloss

Sheen: N/A Viscosity: 40/55 Secs Re-Coat: 60/90 Mins


Sand the wooden substrate in stages, working with a medium sandpaper 120 grit), through to a medium / fine grade (180 –220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Spray Lacquers. Take care to remove all traces of sanding dust and test the chosen sheen level on a similar substrate before application.

Always stir the contents well and ensure all Fiddes Spray Lacquers are applied in a dust free environment with sufficient ventilation.


Formulated for spray application through conventional, airless or HVLP systems.

Add 10/15% Fiddes A/C Thinners if required.

Always add the Catalyst at a ratio of 10:1 before thinning.

It is important that the correct ratio is used at all times.

Maximum Pot Life once mixed remains 48 hours.

Always stir contents well and check sheen before use.

Contact Fiddes Technical Department for specific advice on different spraying techniques and finishing options.

Acid Catalyst Ratio

10:1 by volume


A/C Thinners


60 – 90 mins

Touch Dry

20 mins


8sq. metres per litre approx

Fluid Pressure

10-15 psi

Air Pressure

45-60 psi


5lt, 4x25lt


Gloss- 90%, Satin – 45%, Matt – 20%

You may also like…