KlendooOriginal

Fiddes Water Washable Stripper

£33.78 inc. VAT

This product is intended for sale to non-EU Export clients and are recommended for use in Industrial Installations only, and by relevantly trained industrial stripping specialists following the Safe Working Practices. HSE Proof of Certification required prior to dispatch. Please call 02920 340323 for further information on how to apply for Certification.

Products over £200 (net) please call us on +44 (0)29 2034 0323
or email us at sales@fiddes.co.uk.

Product Description

Fiddes Water Washable Stripper

Fiddes Original Stripper is a non drip, high viscosity water washable Stripper. Ideal for stripping vertical panels or boarding.

Removes a comprehensive selection of varnishes, Lacquers and Paints quickly and effectively.

Klendoo Stripper Original Formula (DCM)

Fiddes Klendoo Stripper is available in both Water Washable (Thick) and Spirit Washable (Thin) formulations.

Both formulations will remove a variety of Lacquer, Paint, Shellac, Water based and solvent based finishes from both wood and metal substrates.

NB:
The above products are intended for sale to non-EU Export clients and are recommended for use in Industrial Installations only, and by relevantly trained industrial stripping specialists following the Safe Working Practices as detailed below:

(a) effective ventilation in all processing areas, in particular for the wet processing and the drying of stripped articles: local exhaust ventilation at strip tanks supplemented by forced ventilation in those areas, so as to minimise exposure and to ensure compliance, where technically feasible, with relevant occupational exposure limits;

(b) measures to minimise evaporation from strip tanks comprising: lids for covering strip tanks except during loading and unloading; suitable loading and unloading arrangements for strip tanks; and wash tanks with water or brine to remove excess solvent after unloading;

(c) measures for the safe handling of dichloromethane in strip tanks comprising: pumps and pipework for transferring paint stripper to and from strip tanks; and suitable arrangements for safe cleaning of tanks and removal of sludge;

(d) personal protective equipment that complies with Directive 89/686/EEC comprising: suitable protective gloves, safety goggles and protective clothing; and appropriate respiratory protective equipment where compliance with relevant occupational exposure limits cannot be otherwise achieved;

(e) adequate information, instruction and training for operators in the use of such equipment.

 

Additional Information

Weight5 kg
Preperation

Ensure immediate and surrounding areas are well protected, and use gloves and eye protection. Sand to remove any loose coating and surface debris.

Application

Apply generously using a brush, ensuring all areas are fully covered. Leave for 10 minutes, allowing enough time for the existing coating to blister.
Apply a second coat, again working well into areas where blistering has occurred.

Leave for 20-25 minutes, test area, and remove coating accordingly with a scraper or coarse steel wool. Repeat if necessary.
Neutralize with White Spirit or warm water.

Clean brushes in White Spirit or warm soapy water.

Packaging

5lt